DeltaCast

Video Input Device  -  Use Native Delta Cast Video as Input

The Native Delta Cast Video Input Device enables low-latency frame grabbing.

Smode requires a different Delta Cast Driver depending on the Smode version.You can download them here: http://download.smode.fr/utilities/Deltacast%20Drivers/

After creating the device, if you encounter the error ‘stream is not running’, you may need to recreate the device. To do so, right-click on it and select ‘Recreate Device’

Supported Cards

12G-SDI card:

• DELTA-12G-elp-h 2i1c (input/output)

• DELTA-12G-elp-h 40 (input)

• DELTA-12G-elp-h 04 (output)

• DELTA-12G-elp-h 20 (input)

• DELTA-12G-elp-h 4c (input/output)

• DELTA-12G-elp-h 2c (input/output)

• DELTA-12G-elp-h 1c (input/output)

• DELTA-3G-elp-40 (input)

• DELTA-3G-elp-20 (input)

Flex:

• FLEX-12G 01 (output)

• FLEX-12G 10 (input)

• FLEX-DP 10 (input)

Troubleshoots

• If the device is not available in the Video Input list, check in the License settings if there is a ‘Video In Pro’ flag:

• For Smode 9.1 and later versions, use the latest DeltaCast driver with the new installation process: VideoMaster_EndUsersInstallationGuide.pdf

• If not found in Device Manager or with an error warning, ensure that the BIOS Boot UEFI is in compatibility mode (not Windows UEFI but Others).

• If it appears in Device Manager but not in DCare, ensure the firmware update was successful. It may require running the install.bat file twice after two reboots.